FT2233HPQ - Hi-Speed Type-C dual channel USB 2.0 serial IC, dual Power Delivery ports

The FTDI FT2233HPQ Hi-Speed Type-C dual channel USB 2.0 serial IC fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to draw or supply current to a USB host device. This IC has one dual-role Power Delivery (PD) port which also carries the USB data communication enabling the FT2233HPQ to switch between the roles of drawing power from the host to power the peripheral or supplying power to charge the host computer. A second Power Delivery port (PD port 2) can be used to connect an external power source/charger. This can provide power to the peripheral board as well as charging the host via Power Delivery port 1.

FT2233HPQ features:

  • Data rates: 12 Mbaud (UART) up to 40MB/s (Sync FIFO)
  • Interfaces: UART, FIFO, 2 x MPSSE, Fast serial, CPU FIFO, Bit-bang/GPIO
  • USB transfer modes:  Bulk
  • Package: 76-pin QFN
  • I/O voltage: 3.3V
  • Virtual COM port: Yes
  • USB host: No
  • Channels: 2
  • USB Class: Vendor
  • Operating temperature: -40°C to +85°C

All Power delivery features of  the FT2233HPQ IC can be evaluated with the UMFT4233HPEV. Most of the USB Serial bridging modes can also be evaluated.

Operating at USB Hi-Speed 480Mbps rate, this fast dual channel bridge chip features either a flexible serial interface or parallel FIFO interface, with data transfer speeds up to 40Mbytes/s. Using a serial EEPROM interface, this device can be configured for a wide variety of asynchronous and synchronous serial standards, such as JTAG, SPI, I2C and UART as well as synchronous and asynchronous parallel FIFO interfaces. In addition, this device features a synchronous, half-duplex FT1248 bus, which allows an engineer to trade off bandwidth for pin count using 1, 2, 4, or 8 data lines at up to 30Mbytes/s. The I/O structure is 3.3V with built-in tolerance for 5V, allowing the designer maximum flexibility when interfacing with FPGAs. On-board voltage regulation provides 3.3V and 1.8V supplies from a 5V source, as well as a power-on-reset function.

Read less

Read more

£ 0.00

FT2233HPQ-REEL

USB Hi-Speed Type-C dual channel serial UART/FIFO/JTAG/SPI/I2C with dual Power Delivery (PD) ports IC, QFN-76 (reels of 3000)

FT2233HPQ-TRAY

USB Hi-Speed Type-C dual channel serial UART/FIFO/JTAG/SPI/I2C with dual Power Delivery (PD) ports IC, QFN-76 (trays of 260)

UMFT4233HPEV

USB Hi-Speed quad channel Serial bridge evaluation module with two Type-C USB PD ports

FT2233HPQ-REEL

Contact us

FT2233HPQ-TRAY

Contact us

UMFT4233HPEV

Contact us

0

Shopping Basket

Quantity: 0 Items: 0
The Cart is Empty
£0.00