UMFT602A/X - FT602 SuperSpeed USB 3.1 IC development modules

The UMFT602A/X evaluation/development modules feature either HSMC or FMC (LPC) connectors for interfacing FTDI Chip's FT602 32 bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware. The UMFT602A/X allow for bridging a FIFO bus to a USB 3.0 host and evaluating the functionality of the FT602As daughter cards, the UMFT602A/X must work with  FIFO master boards which have either a HSMC or FMC connector.

  • Supports USB 3.1 GEN 1 Super Speed (5Gbps)/USB 2.0 High Speed (480Mbps) transfer
  • UVC 1.1, Raw YUV422
  • Up to 4 video input channels. One I2C bus master interface for video source device configuration
  • Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
  • High speed connector for FIFO bus : FMC(Field Programmable Mezzanine Card) or HSMC (High Speed Mezzanine Card)
  • FMC connector is compatible with most Xilinx FPGA reference design boards
  • HSMC is compatible with most Altera FPGA reference design boards
  • Multi powered options: external DC powered, BUS powered, FMC/HSMC powered
  • Hardware Reset
  • Micro-USB 3.0 receptacle

There are 2 models which provide different FIFO bus interfaces with 32 bit data width. The modules are designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. The UMFT602A/X support 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s.

Read less

Read more

£ 0.00

UMFT602A-B

FT600Q USB 3.0 – FIFO bridge evaluation board, UVC Class USB to 32-Bit FIFO bus, HSMC connector

UMFT602X-B

FT602Q USB 3.0 – FIFO bridge evaluation board, UVC Class USB to 32-bit FIFO bus, FMC (Low Pin Count) connector

UMFT602A-B

Contact us

UMFT602X-B

Contact us