UMFT600x/UMFT601x - FT600/FT601 SuperSpeed USB 3.0 IC development modules

The UMFT60xA and UMFT60xX range of evaluation/development modules incorporate either HSMC/FMC(LPC) connectors for interfacing FTDI’s FT600/FT601 USB 3.0 SuperSpeed IC with external hardware. The series allows for bridging a FIFO bus to a USB 3.0 host and evaluating the functionality of the FT600/FT601. As a daughter card, the UMFT600x/UMFT601x must work with a FIFO master board which has either a FMC or HSMC connector.

  • Support for USB 3.0 SuperSpeed (5Gbps), USB High Speed (480Mbps) and USB 2.0 Full Speed (12Mbps) transfer
  • 4 IN channels and 4 OUT channels on FIFO bus connectivity
  • Vendor class USB device with D3xx driver support on the UMFT600x/UMFT601X for generic high speed, high volume applications such as data logging and image transfer.
  • UVC class USB device targeted at facilitating imaging applications supported by the UMFT602x

There are 4 models which provide different FIFO bus interfaces and data bit widths, and they are designed to plug in to most FPGA development platforms supplied by vendors such as Xilinx or Altera. The series supports 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s.

Read less

Read more

£ 0.00

UMFT600A-B

FT600Q USB 3.0 – FIFO bridge evaluation board, 16-bit FIFO bus, HSMC connector, Rev. B

UMFT600X-B

FT600Q USB 3.0 – FIFO bridge evaluation board, 16-bit FIFO bus, FMC connector, Rev. B

UMFT601A-B

FT601Q USB 3.0 – FIFO bridge evaluation board, 32-bit FIFO bus, HSMC connector, Rev. B

UMFT601X-B

FT601Q USB 3.0 – FIFO bridge evaluation board, 32-bit FIFO bus, FMC connector, Rev. B

UMFT600A-B

Contact us

UMFT600X-B

Contact us

UMFT601A-B

Contact us

UMFT601X-B

Contact us