FT232H - Hi-Speed single channel USB 2.0 to UART/FIFO IC

Operating at USB Hi-Speed 480Mbps rate, the FTDI FT232H is a fast single channel bridge chip which features either a flexible serial interface or parallel FIFO interface, with data transfer speeds up to 40Mbytes/s.

  • Single channel USB to serial / parallel ports with a variety of configurations.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
  • Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
  • FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Low operating and USB suspend current.
  • +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
  • Configurable ACBUS I/O pins.

£ 0.00

FT232HL-REEL

Single channel USB 2.0 – UART/FIFO slave interface IC, 48 pin LQFP (reels of 1500)

FT232HL-TRAY

Single channel USB 2.0 – UART/FIFO slave interface IC, 48 pin LQFP (trays of 250)

FT232HQ-REEL

Single channel USB 2.0 – UART/FIFO slave interface IC, 48 pin QFN (reels of 3000)

FT232HQ-TRAY

Single channel USB 2.0 – UART/FIFO slave interface IC, 48 pin QFN (trays of 260)

FT232HL-REEL

Contact us

FT232HL-TRAY

Contact us

FT232HQ-REEL

Contact us

FT232HQ-TRAY

Contact us